Disadvantages of Hydroponics in Growing Marijuana
When talking about cannabis growing in a hydroponics setup, it is essential to keep your mind open to the fact that at some point, you may eventually encounter difficulties. Always remember this, however, that your reaction to the occurring problems can determine the output of your plants. Selecting the better reaction out of a given problem may save your plant, even with the probability of expecting a good yield. At the same time, making the wrong move might lead you to kill your plants. Therefore, whatever the problem may be, it is better to stay calm and figure out the solution accordingly.
The Presence of Algae Growth in a Hydroponics Set Up
One of the most common problems in developing under hydroponics setup is the presence of algae development. Each system uses plant nutrients and water. However, if you have water, you can also expect a growth in algae. Problems can occur later on because algae may attract gnats, which will affect your plant roots. In order to prevent the development of algae, your hydroponic system should be able to minimize the exposure of your solution to light if all means. The reservoir should be created of an opaque or dark material with a lid.
The Encounter Part of Leaks Through Drip/Spray Emitters
Another issue that you may encounter when growing marijuana through the hydroponics process is leaks. One of the usual reasons for these leaks is drip/spray emitters and stab fittings that normally slip out of place. Sometimes, root growth may also cause these leaks. As a result, water will spill out. This can be prevented by making use of a nutrient reservoir that is big enough to hold water in your system. It is also vital to have pipes that are large enough to control the water flow even right after root growth.
Clogs Presence Under Hydroponic Set Up
Clogs are also common problems in a hydroponics setup. This is because drip/spray systems often use pumps of high pressure in pushing the nutrient solution through small openings. In order to at least help out in minimizing these clogs, you may place nutrient filters, as well as pre-filters. Though these filters may help, they are not really a guarantee that the clogging will be completely eliminated. In selecting any of the systems, it is essential to spend time every day in checking the nozzle drip head and replacing the ones that are no longer efficient.